Logic Pro X Key Commands

in General by

Command Key Touch Bar
– Global Commands
Record R
Record/Record Repeat
•Record Repeat
•Record Toggle
•Record/Record Toggle 𝍖 *
•Discard Recording and Return to Last Play Position ⌘.
•Capture as Recording ⇧R
•Capture as Recording and Play
Play 𝍖 ⌅
Pause 𝍖 .
Stop 𝍖 0
Play or Stop ˽
Prelisten Selection-Based Processing ⌥˽
Stop or Play From Last Position
Play or Stop and Go to Last Locate Position
Rewind ,
Forward 𝍖 .
Fast Rewind ⇧,
Fast Forward ⇧.
Forward by Transient ⌃.
Rewind by Transient ⌃,
Rewind one Frame
Forward one Frame
Rewind by Division Value
Forward by Division Value
Shuttle Rewind
Shuttle Forward
Scrub Rewind
Scrub Forward
•Play from Beginning
•Play from Previous Bar
•Play from Left Locator
•Play from Right Locator
•Play from Left Window Edge ⇧⌅
Go to Left Locator
Go to Right Locator
Go to Last Locate Position
Stop and Go to Last Locate Position
Stop and Go to Left Locator
Stop and Go to Beginning
Go to Position… 𝍖 /
Set Left Locator numerically…
Set Right Locator numerically…
Set Left Locator by Playhead
Set Left Locator by Rounded Playhead
Set Punch In Locator by Playhead ⌃⌥⌘I
Set Punch In Locator by Rounded Playhead ⌃⌥⇧⌘I
Set Right Locator by Playhead
Set Right Locator by Rounded Playhead
Set Punch Out Locator by Playhead ⌃⌥⌘O
Set Punch Out Locator Point by Rounded Playhead ⌃⌥⇧⌘O
•Set Locators by Regions/Events/Marquee
Set Locators by Regions/Events/Marquee and Enable Cycle ⌘U
•Set Rounded Locators by Regions/Events
Set Rounded Locators by Regions/Events and Enable Cycle U
•Set Locators and Play
•Set Rounded Locators and Play
•Set Rounded Locators and Cycle Play
•Set Rounded Locators and Record
•Set Rounded Locators and Cycle Record
•Play from Selection ⇧˽
Set Punch Locators by Regions/Events/Marquee
Set Rounded Punch Locators by Regions/Events
Set Punch Locators by Cycle Locators
Swap Left and Right Locators 𝍖 =
Move Locators Forward by Cycle Length ⇧⌘.
Move Locators Backwards by Cycle Length ⇧⌘,
Move Locators Forward by 1 Bar
Move Locators Backwards by 1 Bar
Toggle Auto Set Locators
Go to Selection Start ⌃↖
Go to Selection End ⌃↘
•Go to Beginning of First Region
•Go to End of Last Region ⌥↩
•Go to Beginning ↩
•Go to End
Select Previous Section for Realtime Comping
Create Marker ⌥’
Create Marker without rounding ⌃⌥’
Create Marker for Selected Regions ⌥⇧’
Delete Marker ⌥⌫
Open Marker List
Open Marker Text
Set Locators by Marker and Enable Cycle ⌃⌥C
Set Locators by Previous Marker and Enable Cycle ⌃⌥,
Set Locators by Next Marker and Enable Cycle ⌃⌥.
Go to Previous Marker
Go to Next Marker
Go to Previous Marker And Set Locators ⌥,
Go to Next Marker And Set Locators ⌥.
Go to Marker Number… ⌥/
Rename Marker ⇧’
Go to Marker Number 1 𝍖 1
Go to Marker Number 2 𝍖 2
Go to Marker Number 3 𝍖 3
Go to Marker Number 4 𝍖 4
Go to Marker Number 5 𝍖 5
Go to Marker Number 6 𝍖 6
Go to Marker Number 7 𝍖 7
Go to Marker Number 8 𝍖 8
Go to Marker Number 9 𝍖 9
Go to Marker Number 10 𝍖 ⌃0
Go to Marker Number 11 𝍖 ⌃1
Go to Marker Number 12 𝍖 ⌃2
Go to Marker Number 13 𝍖 ⌃3
Go to Marker Number 14 𝍖 ⌃4
Go to Marker Number 15 𝍖 ⌃5
Go to Marker Number 16 𝍖 ⌃6
Go to Marker Number 17 𝍖 ⌃7
Go to Marker Number 18 𝍖 ⌃8
Go to Marker Number 19 𝍖 ⌃9
Go to Marker Number 20
Create Arrangement Marker
Select Previous Project
Select Next Project
Select Project 1
Select Project 2
Select Project 3
Select Project 4
Select Project 5
Select Project 6
Select Project 7
Select Project 8
Select Project 9
Select Project 10
Select Project 11
Select Project 12
Select Project 13
Select Project 14
Select Project 15
Select Project 16
Select Project 17
Select Project 18
Select Project 19
Select Project 20
Cycle Mode C
Autopunch Mode ⌃⌥⌘P
Replace 𝍖 /
Solo Mode ⌃S
•Set Solo Lock Mode ⌥S
•Reselect Solo-Locked Regions ⌥⇧S
Clear/Recall Solo ⌃⌥⌘S
Mute off for all ⌃⇧M
Record off for all
Sync intern/extern
•Tap Tempo 𝍖 ⌃⌥⌘`
MIDI Machine Control
•Toggle Level Meter Scale
•Set Next Higher Division
•Set Next Lower Division
•Set Division Value to 1/4 Note
•Set Division Value to 1/8 Note
•Set Division Value to 1/16 Note
•Set Division Value to 1/32 Note
•Set Division Value to 1/64 Note
•Set Division Value to 1/128 Note
•Set Division Value to 1/4 Triplet (1/6)
•Set Division Value to 1/8 Triplet (1/12)
•Set Division Value to 1/16 Triplet (1/24)
•Set Division Value to 1/32 Triplet (1/48)
•Set Division Value to 1/64 Triplet (1/96)
•Set Division Value to 1/128 Triplet (1/192)
MIDI/Monitor Metronome Click K
Count-in ⇧K
Send discrete Note Offs (Panic)
Duplicate Screenset…
Rename Screenset…
Delete Screenset
Lock/Unlock Current Screenset
Revert to Saved Screenset
•Next Screenset
•Previous Screenset
Recall Screenset 1 𝍖 1
Recall Screenset 2 𝍖 2
Recall Screenset 3 𝍖 3
Recall Screenset 4 𝍖 4
Recall Screenset 5 𝍖 5
Recall Screenset 6 𝍖 6
Recall Screenset 7 𝍖 7
Recall Screenset 8 𝍖 8
Recall Screenset 9 𝍖 9
Recall Screenset 1x 𝍖 ⌃1
Recall Screenset 2x 𝍖 ⌃2
Recall Screenset 3x 𝍖 ⌃3
Recall Screenset 4x 𝍖 ⌃4
Recall Screenset 5x 𝍖 ⌃5
Recall Screenset 6x 𝍖 ⌃6
Recall Screenset 7x 𝍖 ⌃7
Recall Screenset 8x 𝍖 ⌃8
Recall Screenset 9x 𝍖 ⌃9
Region Inspector Float ⌥R
Import Project Settings…
Open Synchronization Project Settings…
Open Metronome Project Settings…
Open Recording Project Settings…
Open Tuning Project Settings…
Open Audio Project Settings…
Open MIDI Project Settings…
Open Chase Events Project Settings…
Open Score Project Settings…
Open Movie Project Settings…
Open Assets Project Settings…
Open Preferences… ⌘,
Open General Preferences…
Open Audio Preferences…
Open Recording Preferences…
Open MIDI Preferences…
Open Display Preferences…
Open Score Preferences…
Open Movie Preferences…
Open Automation Preferences… ⌥A
Open Control Surfaces Preferences…
Open My Info Preferences…
Open Surround Preferences…
Reset All Preferences Except Key Commands…
Plug-in Manager…
Open Event List… ⌘7
Open Main Window… ⌘1
Open Mixer… ⌘2
Open Smart Controls ⌘3
Open Score Editor… ⌘5
Open Step Editor…
Open Piano Roll… ⌘4
Open Transport Float…
Open Project Audio… ⌘8
Note Repeat ⌃⌥↩ ⇧7⃣
Spot Erase ⌃⌥⌫ ⇧8⃣
Open Audio File Editor… ⌘6
Open Signature List…
Show/Hide Graphic Keyboard…
Show/Hide Musical Typing… ⌘K
Show/Hide Event Float ⌥E ⇧5⃣
Show/Hide Event List
Show/Hide Main Window
Show/Hide Mixer X
Show/Hide Smart Controls B
Show/Hide Score Editor N
Show/Hide Staff Style Window ⌃⌥⇧S
Show/Hide Score Sets Window ⌃⌥⇧I
Show/Hide Step Editor
Show/Hide Piano Roll P
Show/Hide Control Bar
Show/Hide Step Input Keyboard ⌥⌘K
Show/Hide Project Audio
Show/Hide Loop Browser O
Show/Hide Library Y
Show/Hide File Browser
Show/Hide Audio Track Editor
Show/Hide Audio File Editor W
Show/Hide Marker List
Show/Hide Tempo List
Show/Hide Signature List
Show/Hide Quick Help ⇧/
Quick Help Follows Pointer
Show Detailed Help ⌘/
Show/Hide Help Tags
Open in External Sample Editor ⇧W
Open System Performance…
Open Tempo List… ⌥⇧T
Open Key Commands… ⌥K
Show/Hide Colors ⌥C ⇧1⃣
Enter/Exit Full Screen ⌃⌘F
Show/Hide Tuner ⇧2⃣
Open Movie… ⌥⌘O
Show/Hide Movie Window
Remove Movie
Import Audio from Movie
Export Audio to Movie…
Create Scene Markers (Auto Range)
Remove Scene Markers (Auto Range)
Show Movie in Finder
•Toggle Level of Input Channel Strips
•Toggle Level of Audio Channel Strips
•Toggle Level of Auxiliary Channel Strips
•Toggle Level of Bus Channel Strips
•Toggle Level of Output Channel Strips
Toggle Current Track Automation Off/Read ⌃⌘O ⌃3⃣
Set Current Track to Automation Read
Toggle Current Track Automation Touch/Read ⌃2⃣
Toggle Current Track Automation Latch/Read ⌃⌘A
Toggle Current Track Automation Write/Read
Toggle Current Track Automation Trim Mode
Toggle Current Track Automation Write Relative Mode
Set All Tracks to Automation Off ⌃⇧⌘O
Set All Tracks to Automation Read ⌃⇧⌘R
Set All Tracks to Automation Touch ⌃⇧⌘T
Set All Tracks to Automation Latch ⌃⇧⌘L
Set All Tracks to Automation Write
Track Automation Event List… ⌃⌘E
Toggle writing Volume Automation in Write Mode
Toggle writing Pan Automation in Write Mode
Toggle writing Mute Automation in Write Mode
Toggle writing Send Levels Automation in Write Mode
Toggle writing Plug-in parameters Automation in Write Mode
Toggle writing Solo Automation in Write Mode
Toggle Automation Quick Access ⌃⌥⌘A
Set Move Track Automation with Regions to Never
Set Move Track Automation with Regions to Always
Set Move Track Automation with Regions to Ask
Toggle Move Track Automation with Regions Never/Always
Enable/Disable Automation Groups ⇧G ⌃5⃣
Open Group Settings… ⌥⇧G
Show/Hide Groups Window ⇧6⃣
Refresh Freeze Files
Audio Hardware Setup
Apogee Control Panel
I/O Labels…
Toggle Varispeed
Toggle Allow Quick Punch-in
Toggle Auto Input Monitoring
Toggle Pre-Fader Metering
Clear Overload Flag in Audio Channel Display
Close Project without Saving
Close Window ⌘W
Cycle Through Windows ⌘`
Cycle Through Windows (counter-clockwise) ⇧⌘`
Redraw current window
Toggle ‘Select Regions on Track Selection’
Toggle ‘Select Track on Region Selection’
•Select Previous Track ↑
•Select Next Track ↓
Hide Logic Pro X ⌘H
Hide Others ⌥⌘H
Quit ⌘Q
New Empty Project ⇧⌘N
New from Template… ⌘N
Open… ⌘O
Project Settings… ⌥P
Clean up Project…
Consolidate Project…
Rename Project…
Close Project ⌥⌘W
Save ⌘S
Save Project as… ⇧⌘S
Save A Copy As…
Close and Clean up Project
Save as Template…
Revert to Saved…
Page Setup…
Print ⌘P
Import… ⌘I
Export Selection as MIDI File… ⌥⌘E
Export Score as MusicXML…
Export Selection as Audio File…
Export Regions as Audio Files…
Export Tracks as Audio Files… ⌘E
Export All Tracks as Audio Files… ⇧⌘E
Export Project as AAF File…
Project to Final Cut Pro XML…
Cycle Through Window Views ⇥
Cycle Through Window Views (counter-clockwise) ⇧⇥
Minimize Window ⌘M
Minimize All Windows ⌥⌘M
Zoom Window ⌃⌘M
Import Audio File… ⇧⌘I
Next Plug-in Setting
Previous Plug-in Setting
Next EXS Instrument
Previous EXS Instrument
Next Plug-in Setting or EXS Instrument
Previous Plug-in Setting or EXS Instrument
Next Channel Strip Setting of focused Track ⇧]
Previous Channel Strip Setting of focused Track ⇧[
Copy Channel Strip Setting ⌥⌘C
Paste Channel Strip Setting ⌥⌘V
Paste Channel Strip Setting Plug-Ins Only
Paste Channel Strip Setting Sends Only
Reset Channel Strip Setting
Save Channel Strip Setting as…
Save as Performance…
Delete Channel Strip Setting
Next Patch, Plug-in Setting or EXS Instrument ]
Previous Patch, Plug-in Setting or EXS Instrument [
Toggle Channel Strip Mute M
Toggle Channel Strip Solo S
Toggle Channel Strip Record Enable
Toggle Channel Strip Input Monitoring ⌃I
Toggle Channel Strip Format (mono/stereo) ⌃⇧S
Toggle Channel Strip Arpeggiator
Toggle Plug-in Latency Compensation: All /Audio and Instrument Tracks
Toggle Low Latency Mode
Toggle Software Monitoring
Show/Hide All Plug-in Windows V ⇧4⃣
Project Information…
Toggle Musical Grid
Set Nudge Value to Bar ⌃⌥M
Set Nudge Value to Beat ⌃⌥B
Set Nudge Value to Division ⌃⌥D
Set Nudge Value to 10 Ticks
Set Nudge Value to Tick ⌃⌥T
Set Nudge Value to Step Input
Set Nudge Value to 1/1 Note
Set Nudge Value to 1/2 Note
Set Nudge Value to 1/4 Note
Set Nudge Value to 1/8 Note
Set Nudge Value to 1/16 Note
Set Nudge Value to 1/32 Note
Set Nudge Value to 1/64 Note
Set Nudge Value to 1/2 Triplet (1/3)
Set Nudge Value to 1/4 Triplet (1/6)
Set Nudge Value to 1/8 Triplet (1/12)
Set Nudge Value to 1/16 Triplet (1/24)
Set Nudge Value to 1/32 Triplet (1/48)
Set Nudge Value to 1/64 Triplet (1/96)
Set Nudge Value to 5 SMPTE Frame
Set Nudge Value to SMPTE Frame ⌃⌥F
Set Nudge Value to 0.5 SMPTE Frame ⌃⌥H
Set Nudge Value to SMPTE Bit
Set Nudge Value to 10 ms ⌃⌥0
Set Nudge Value to 1 ms ⌃⌥1
Set Nudge Value to Sample ⌃⌥S
Sustain inserted note(s) –
New Project Alternative…
Edit Project Alternatives
Export Alternative as Project…

– Global Control Surfaces Commands
Open Setup
Open Controller Assignments ⌥⇧K
Open Install
Scan All Models
Learn new Controller Assignment ⌘L
Bypass All Control Surfaces

– Various Windows
Undo ⌘Z
Redo ⇧⌘Z
Undo History… ⌥⌘Z
Delete Undo History
Cut ⌘X
Copy ⌘C
Paste ⌘V
Delete
Delete and Move
Select All ⌘A
•Show Tool Menu T
•Set Next Tool ⌥⇟
•Set Previous Tool ⌥⇞
•Set Pointer Tool ⌥1⃣
•Set Scissors Tool ⌥3⃣
•Set Glue Tool ⌥4⃣
•Set Eraser Tool
•Set MIDI Thru Tool
•Set Text Tool
•Set Solo Tool
•Set Pencil Tool ⌥5⃣
•Set Crosshair Tool
•Set Mute Tool
•Set Finger Tool ⌥8⃣
•Set Layout Tool
•Set Zoom Tool
•Set Resize Tool
•Set Voice Separation Tool
•Set Camera Tool
•Set Velocity Tool
•Set Quantize Tool
•Set Fade Tool ⌥6⃣
•Set Automation Select Tool
•Set Automation Curve Tool
•Set Marquee Tool ⌥2⃣
•Set Flex Tool
•Set Brush Tool ⌥7⃣
Set Previously Set Tool
Show/Hide Global Tracks G
Configure Global Tracks… ⌥G
Show/Hide Arrangement Track ⇧⌘A
Show/Hide Marker Track ⇧⌘K
Show/Hide Movie Track ⇧⌘O
Show/Hide Signature Track
Show/Hide Transposition Track ⇧⌘X
Show/Hide Tempo Track ⇧⌘T
Show/Hide Beat Mapping Track ⇧⌘B
Show/Hide Arrangement Track Only
Show/Hide Marker Track Only ‘
Show/Hide Movie Track Only
Show/Hide Signature Track Only
Show/Hide Transposition Track Only
Show/Hide Tempo Track Only
Show/Hide Beat Mapping Track Only
Hide All Global Tracks
Show All Global Tracks
Tempo Track: Extend Left
Tempo Track: Replace By Average
Zoom Horizontal Out ⌘←
Zoom Horizontal In ⌘→
Zoom Vertical Out ⌘↑
Zoom Vertical In ⌘↓
•Recall Zoom 1 ⌃⌥⌘1
•Recall Zoom 2 ⌃⌥⌘2
•Recall Zoom 3 ⌃⌥⌘3
•Save as Zoom 1 ⌃⌥⇧⌘1
•Save as Zoom 2 ⌃⌥⇧⌘2
•Save as Zoom 3 ⌃⌥⇧⌘3
Zoom to fit Selection vertically and horizontally, store Navigation Snapshot
Zoom to fit Selection horizontally, store Navigation Snapshot
Zoom to fit Selection vertically, store Navigation Snapshot
Zoom to fit Locators, store Navigation Snapshot ⌃⇧Z
Zoom to fit All Contents, store Navigation Snapshot
Toggle Zoom to fit Selection or All Contents Z
Store Navigation Snapshot ⇧Z
Navigation: Back ⌥Z
Navigation: Forward ⌥⇧Z
Toggle Horizontal Auto Zoom
Toggle Vertical Auto Zoom
Page Up ⇞
Page Down ⇟
Page Left ↖
Page Right ↘
1/3 Page Left
1/3 Page Right
1/8 Page Left
1/8 Page Right
Page Top
Page Bottom
Page Left-Most
Page Right-Most
Scroll in Play ⌃`
Show/Hide Control Bar
Show/Hide Inspector I
Show/Hide Local Inspector
Grid ⌃G
Catch Playhead Position `
Link Window (Same Level)
MIDI Out Toggle ⌥O
MIDI In Toggle ⌥I
Mute Notes/Regions/Folders On/Off ⌃M
MIDI Draw: Disable ⇧⌘Y
MIDI Draw: Autodefine ⌘Y
MIDI Draw: Volume
MIDI Draw: Panorama
MIDI Draw: Balance
MIDI Draw: Modulation
MIDI Draw: Breath
MIDI Draw: Foot Control
MIDI Draw: Portamento Time
MIDI Draw: Expression
MIDI Draw: Sustain Pedal
MIDI Draw: Control Change 20
MIDI Draw: Control Change 21
MIDI Draw: Control Change 22
MIDI Draw: Control Change 23
MIDI Draw: Control Change 24
MIDI Draw: Control Change 25
MIDI Draw: Control Change 26
MIDI Draw: Control Change 27
MIDI Draw: Control Change 28
MIDI Draw: Control Change 29
MIDI Draw: Control Change 30
MIDI Draw: Control Change 31
MIDI Draw: Control Change 32
MIDI Draw: Other… ⌥Y
MIDI Draw: Channel Pressure
MIDI Draw: Pitch Bend
MIDI Draw: Program Change
MIDI Draw: Note Velocity
•Increase Last Clicked Parameter by 1 𝍖 =
•Decrease Last Clicked Parameter by 1 𝍖 –
•Increase Last Clicked Parameter by 10 𝍖 ⇧=
•Decrease Last Clicked Parameter by 10 𝍖 ⇧-
Customize Control Bar and Display…

– Windows Showing Audio Files
Show File(s) in Finder ⇧⌘R
Snap Edits to Zero Crossings 𝍖 ⌃0
Add to Tracks… ⌘;
Prelisten ⌃˽
•Cycle Audition ⌃C
Show/Hide Selection-Based Processing ⌥⇧P ⇧3⃣
Apply Selection-Based Processing Again ⌃⌥P

– Main Window Tracks and Various Editors
New Tracks… ⌥⌘N
New Audio Track ⌥⌘A ⌃6⃣
New Software Instrument Track ⌥⌘S ⌃7⃣
New Drummer Track ⌃8⃣
New External MIDI Track ⌥⌘X
New Track with Duplicate Settings ⌘D
New Track with Duplicate Settings and Content
New Track with Next Channel / MIDI Channel ⌃↩
New Track with Same Channel Strip/Instrument ⌃⇧↩
Append Track to Track List
Delete Track ⌘⌫
Delete unused Tracks ⇧⌘⌫
Go Into Folder or Region
•Go Out of Folder or Region
Deselect All ⌥⇧D
Invert Selection ⇧I
Select All Following ⇧F
Select All Following of Same Track/Pitch ⌃⇧F
Select All Inside Locators ⇧L
Select Empty Regions
Select SMPTE Locked Regions
Select Overlapped Regions/Events ⇧O
Select Equal Regions/Events ⇧E
Select Similar Regions/Events ⇧S
Select Same Subpositions ⇧P
Select Muted Regions/Events ⇧M
Select Equal Colored Regions/Events ⇧C
•Select First, or Shift Marquee Selection Left ⇧↖
•Select Last, or Shift Marquee Selection Right ⇧↘
•Select Previous Region/Event or Move Marquee End (or Marquee Point) to Previous Transient ←
•Select Next Region/Event or Move Marquee End (or Marquee Point) to Next Transient →
•Toggle Previous Region/Event or Move Marquee Start (or Extend Marquee Selection) to Previous Transient ⇧←
•Toggle Next Region/Event or Move Marquee Start (or Extend Marquee Selection) to Next Transient ⇧→
Scroll to Selection ⇧`
Loop Regions/Folders On/Off L
Flex/Follow Tempo On/Off ⌃F
Reverse On/Off
Quantize Selected Events Q ⌘6⃣
•Set Quantize Parameter to Next Value
•Set Quantize Parameter to Previous Value
Undo Quantization ⌥⌘Q
Delete Duplicated Events ⌥D
Delete inside Locators
Delete outside Locators
Delete outside Region Boundaries
•Delete Similar Regions/Events
•Delete but Keep Similar Regions/Events
•Delete and Select Next Region/Event
Paste at Original Position
Paste Replace ⇧⌘V
Repeat Regions/Events ⌘R ⌘5⃣
Repeat Regions/Events as Alias
Repeat Regions/Events Multiple Times…
Copy MIDI Events…
Refresh Region
Convert to Midi Region
Convert to Drummer Region
Join Regions/Notes ⌘J ⌘4⃣
Split Regions/Events at Locators or Marquee Selection ⌃⌘T ⌘2⃣
Split Regions/Events at Rounded Playhead Position
Split Regions/Events at Playhead Position ⌘T ⌘1⃣
Move Region/Event to Playhead Position (Pickup Clock) ;
•Move Region/Event to Playhead Position and Select Next Region/Event (Pickup Clock+) ⇧;
Set Region/Event/Marquee Start to Playhead Position ⌘[
Set Region/Event/Marquee End to Playhead Position ⌘]
Nudge Region/Event Position Right by Nudge Value ⌥→
Nudge Region/Event Position Left by Nudge Value ⌥←
•Nudge Region/Event Position Right by Tick
•Nudge Region/Event Position Left by Tick
•Nudge Region/Event Position Right by Division
•Nudge Region/Event Position Left by Division
•Nudge Region/Event Position Right by Beat
•Nudge Region/Event Position Left by Beat
•Nudge Region/Event Position Right by Bar
•Nudge Region/Event Position Left by Bar
•Nudge Region/Event Position Right by SMPTE Frame
•Nudge Region/Event Position Left by SMPTE Frame
•Nudge Region/Event Position Right by SMPTE Bit
•Nudge Region/Event Position Left by SMPTE Bit
•Nudge Region/Event Position Right by 1/2 SMPTE Frame
•Nudge Region/Event Position Left by 1/2 SMPTE Frame
•Nudge Region/Event Position Right by 5 SMPTE Frames
•Nudge Region/Event Position Left by 5 SMPTE Frames
•Nudge Region/Event Position Right by Sample
•Nudge Region/Event Position Left by Sample
•Nudge Region/Event Position Right by 1 ms
•Nudge Region/Event Position Left by 1 ms
•Nudge Region/Event Position Right by 10 ms
•Nudge Region/Event Position Left by 10 ms
•Nudge Region/Event Length Right by Nudge Value ⌥⇧→
•Nudge Region/Event Length Left by Nudge Value ⌥⇧←
•Nudge Region/Event Length Right by Tick
•Nudge Region/Event Length Left by Tick
•Nudge Region/Event Length Right by Division
•Nudge Region/Event Length Left by Division
•Nudge Region/Event Length Right by Beat
•Nudge Region/Event Length Left by Beat
•Nudge Region/Event Length Right by Bar
•Nudge Region/Event Length Left by Bar
•Nudge Region/Event Length Right by SMPTE Frame
•Nudge Region/Event Length Left by SMPTE Frame
•Nudge Region/Event Length Right by SMPTE Bit
•Nudge Region/Event Length Left by SMPTE Bit
•Nudge Region/Event Length Right by 1/2 SMPTE Frame
•Nudge Region/Event Length Left by 1/2 SMPTE Frame
•Nudge Region/Event Length Right by 5 SMPTE Frames
•Nudge Region/Event Length Left by 5 SMPTE Frames
•Nudge Region/Event Length Right by Sample
•Nudge Region/Event Length Left by Sample
•Nudge Region/Event Length Right by 1 ms
•Nudge Region/Event Length Left by 1 ms
•Nudge Region/Event Length Right by 10 ms
•Nudge Region/Event Length Left by 10 ms
Apply Transform User Preset 1 to selected Events
Apply Transform User Preset 2 to selected Events
Apply Transform User Preset 3 to selected Events
Apply Transform User Preset 4 to selected Events
Apply Transform User Preset 5 to selected Events
Apply Transform User Preset 6 to selected Events
Apply Transform User Preset 7 to selected Events
Apply Transform User Preset 8 to selected Events
Apply Transform User Preset 9 to selected Events
Apply Transform User Preset 10 to selected Events
Apply Transform User Preset 11 to selected Events
Apply Transform User Preset 12 to selected Events
Apply Transform User Preset 13 to selected Events
Apply Transform User Preset 14 to selected Events
Apply Transform User Preset 15 to selected Events
Apply Transform User Preset 16 to selected Events
Apply Transform User Preset 17 to selected Events
Apply Transform User Preset 18 to selected Events
Apply Transform User Preset 19 to selected Events
Apply Transform User Preset 20 to selected Events
Apply Transform User Preset 21 to selected Events
Apply Transform User Preset 22 to selected Events
Apply Transform User Preset 23 to selected Events
Apply Transform User Preset 24 to selected Events
Apply Transform User Preset 25 to selected Events
Apply Transform User Preset 26 to selected Events
Apply Transform User Preset 27 to selected Events
Apply Transform User Preset 28 to selected Events
Apply Transform User Preset 29 to selected Events
Apply Transform User Preset 30 to selected Events
Secondary Ruler ⌃⌥⌘R
Open Track Stack ⌃⌘→
Close Track Stack ⌃⌘←
Open/Close Track Stack
Open/Close All Track Stacks
Snap Mode: Smart
Snap Mode: Bar
Snap Mode: Beat
Snap Mode: Division
Snap Mode: Ticks
Snap Mode: 1/1 Note
Snap Mode: 1/2 Note
Snap Mode: 1/4 Note
Snap Mode: 1/8 Note
Snap Mode: 1/16 Note
Snap Mode: 1/32 Note
Snap Mode: 1/64 Note
Snap Mode: 1/2 Triplet (1/3)
Snap Mode: 1/4 Triplet (1/6)
Snap Mode: 1/8 Triplet (1/12)
Snap Mode: 1/16 Triplet (1/24)
Snap Mode: 1/32 Triplet (1/48)
Snap Mode: 1/64 Triplet (1/96)
Snap Mode: Frames
Snap Mode: Quarter Frames
Snap Mode: Samples
Snap Mode: Off
Snap to Grid On/Off ⌘G
Snap Automation
Snap Quick Swipe Comping
Snap Regions to Absolute/Relative Value
Snap Regions to Absolute Value
Snap Regions to Relative Value
Snap Mode: As Time Quantization
Shuffle Left ⌥[ ⌘7⃣
Shuffle Right ⌥] ⌘8⃣
•Set Track and MIDI Thru Parameters by Region/Folder
•Select Track by Region/Folder
•Set MIDI Thru Parameters by Region/Folder
Bounce… ⌘B
Create Tempo Change
Create Time Signature Change
Create Key Signature Change
Nudge Automation up 1 Step
Nudge Automation down 1 Step
Nudge Automation up 10 Steps
Nudge Automation down 10 Steps

– Various Editors
Select Same Channels ⇧H
Select Same Articulation IDs ⇧D
Trim Note to Remove Overlaps for Adjacent \
Trim Note End to Following Notes (Force Legato) ⇧\
Select Highest Notes ⇧↑
Select Lowest Notes ⇧↓
Set MIDI Channel to Voice Number
Convert Sustain Pedal to Note Length
Trim Note to Remove Overlaps for Selected
Trim Note End to Selected (Force Legato) ⌘3⃣
Trim Note to Remove Overlaps for Repeated
Transpose Event +1 Semitone ⌥↑
Transpose Event -1 Semitone ⌥↓
Transpose Event +12 Semitones ⌥⇧↑
Transpose Event -12 Semitones ⌥⇧↓
•Event Channel +1
•Event Channel -1
•Event Channel = 1
•Event Channel = 2
•Event Channel = 3
•Event Channel = 4
•Event Channel = 5
•Event Channel = 6
•Event Channel = 7
•Event Channel = 8
•Event Channel = 9
•Event Channel = 10
•Event Channel = 11
•Event Channel = 12
•Event Channel = 13
•Event Channel = 14
•Event Channel = 15
•Event Channel = 16
Show Event Position and Length as Time or Bars/Beats ⌃⌥R

– Main Window Tracks
•Extend Track Selection Up ⇧↑
•Extend Track Selection Down ⇧↓
•Extend Track Selection to Top
•Extend Track Selection to Bottom
•Select Previous Region on Selected Track ←
•Select Next Region on Selected Track →
•Deselect All Regions except on selected Track
Pack Folder
Unpack Folder to New Tracks
Unpack Folder to Existing Tracks
Create 1 Automation Point at Region Borders ⌃⇧⌘1
Create 2 Automation Points at Region Borders ⌃⇧⌘2
Create 1 Automation Point at Every Region Border ⌃⌘1
Create 2 Automation Points at Every Region Border ⌃⌘2
Delete Redundant Automation Points ⌃⌫
Delete Visible Automation on Selected Tracks ⌃⌘⌫
Delete All Automation on Selected Tracks ⌃⇧⌘⌫
Delete Orphaned Automation on Selected Tracks ⌃⇧⌫
Delete All Track Automation
Move Visible Region Data to Track Automation ⌃⌘↑
Move Visible Track Automation to Region ⌃⌘↓
Move All Region Data to Track Automation ⌃⇧⌘↑
Move All Track Automation to Region ⌃⇧⌘↓
Delete All Region Automation
Pack Take Folder ⌃⌥⌘F
Unpack Take Folder to Existing Tracks ⌃⌘U
Unpack Take Folder to New Tracks ⌃⇧⌘U
Un/disclose Take Folder ⌥F
Flatten Take Folder ⌥⇧U
Flatten and Merge Take Folder ⌥U
Rename Take or Comp ⇧T
Delete Take or Comp ⌥⇧⌫
Export Active Take or Comp to New Track
Move Active Take or Comp to New Track
Toggle Take Folder Quick Swipe Comping Mode ⌥Q
Create New Comp
Select Previous Take or Comp ⌥⇧↑
Select Next Take or Comp ⌥⇧↓
Slice at Comp Section Borders
Trim to Active Comp Sections
New Tracks for Overlapped Regions
New Tracks for Selected Regions
Create Track Stack… ⇧⌘D
Create Folder Stack ⇧⌘F
Create Summing Stack ⇧⌘G
Flatten Stack ⇧⌘U
Bounce Regions in Place ⌃B
Bounce Tracks in Place ⌃⌘B
Drum Replacement/Doubling ⌃D
Toggle Hide View H
Hide/Show Current Track and Select Next Track ⌃H
Unhide All Tracks ⌃⇧H
Hide All Empty Tracks
Toggle Hide Group 1 ⌃⇧1
Toggle Hide Group 2 ⌃⇧2
Toggle Hide Group 3 ⌃⇧3
Toggle Hide Group 4 ⌃⇧4
Toggle Hide Group 5 ⌃⇧5
Toggle Hide Group 6 ⌃⇧6
Toggle Hide Group 7 ⌃⇧7
Toggle Hide Group 8 ⌃⇧8
Toggle Hide Group 9 ⌃⇧9
Toggle Track On ⌥M
Toggle Track On of all Tracks of Folder
Toggle Track On of all Tracks With Same Instrument of Project
Toggle Track Solo
Toggle Track Protect
Toggle Track Freeze
Toggle Track Record Enable ⌃R
Individual Track Zoom In ⌃⌥⌘↓
Individual Track Zoom Out ⌃⌥⌘↑
Toggle Individual Track Zoom ⌃⌥⌘Z
Toggle Zoom Focused Track ⌃Z
Reset Individual Track Zoom ⌃⌥⌘⌫
Individual Track Zoom Reset for All Tracks ⌃⌥⇧⌘⌫
Audio Crossfade Options for Merge… ⌥X
Apply Default Crossfade ⌃⌥X
Apply Last Edited Fade Again ⌥⇧X
Remove Fades
Join Regions per Tracks J
Snip: Cut Section Between Locators (Selection)
Snip: Cut Section Between Locators (Global) ⌃⌘X
Copy Section Between Locators (Global)
Insert Silence Between Locators (Selection)
Insert Silence Between Locators (Global) ⌃⌘Z
Splice: Insert Snipped Section at Playhead (Selection)
Splice: Insert Snipped Section at Playhead (Global) ⌃⌘V
Repeat Section Between Locators (Selection)
Repeat Section Between Locators (Global) ⌃⌘R ⌘6⃣
Cut Sections of Selected Arrangement Markers ⌥⌘⌫
Separate MIDI Region by MIDI Channel
Separate MIDI Region by Note Pitch
Separate MIDI Region by Articulation ID
Create New Instrument
Rename Track ⇧↩
Delete Track Name
Move Selected Regions to Selected Track ⌃⇧T
Copy Selected Regions to Selected Track
Adjust Tempo using Region Length and Locators
Move Selection with First Transient to Nearest Beat
Move Region to Recorded Position ⌥⇧⌘R
Convert Regions to New Regions ⌥⌘R
Convert Regions to New Audio Files ⌥⌘F
Convert Regions to New Sampler Track ⌃E
Time Stretch Region Length to Locators ⌥⌘L
Time Stretch Region Length to Nearest Bar ⌥⌘B
Show Beat Mapping Track
Detect Tempo of Selected Region… ⌥⌘T
Remove Silence from Audio Region… ⌃X
Add Region to Loop Library… ⌃⇧O
Copy as ReCycle Loop
Paste ReCycle Loop
Normalize Region Parameters ⌃N
Normalize without Channel
Normalize without Channel, Delay
Apply Quantization Destructively ⌃Q
Convert Loops to Regions ⌃L
Set Optimal Region Sizes Rounded by Bar ⌃\
Set Optimal Region Sizes Rounded by Note Value
Set Region Start to Bar
Remove Overlaps \
Trim Region End to Next Region ⇧\
Trim Region Start to Previous Region
Trim Regions to Fill within Locators ⌥\
Insert Instrument MIDI settings as Events
Crop Regions outside Locators or Marquee Selection ⌘\ ⌘3⃣
Remove Groove Template from List
Make Groove Template
Advanced Quantization Parameters
Show/Hide Track Automation A ⌃1⃣
Show/Hide Flex Pitch/Time ⌘F ⌃4⃣
Slice at Transient Markers
Slice at Flex Markers
Trim Region Start to Previous Transient ⌃⇧[
Trim Region Start to Next Transient ⌃⇧]
Trim Region End to Previous Transient ⌃[
Trim Region End to Next Transient ⌃]
Rename Regions ⇧N
Name Regions by Track Name ⌥⇧N
Name Tracks by Region Name ⌥⇧⌘N
Color Regions by Track Color ⌥⇧C
Color Tracks by Region Color ⌥⇧⌘C
Drag Mode: Overlap
Drag Mode: No Overlap
Drag Mode: X-Fade
Drag Mode: Shuffle L
Drag Mode: Shuffle R
Waveform Vertical Zoom x 1 (Normal)
Waveform Vertical Zoom x 2
Waveform Vertical Zoom x 4
Waveform Vertical Zoom x 8
Waveform Vertical Zoom Out ⌘-
Waveform Vertical Zoom In ⌘=
Toggle Waveform Vertical Zoom
Show/Hide Toolbar ⌃⌥⌘T
Customize Toolbar…
Configure Track Header… ⌥T
Marquee Ruler
Show/Hide Editor E
Show/Hide Note Pad ⌥⌘P
Show/Hide List Editors D
Show/Hide Browsers F
Show/Hide Output Track ⇧⌘M
Alignment Guides On/Off ⌥⌘G
Create Volume Fade Out on Main Output
Create 1 Automation Point each for Volume, Pan, Sends
Create 2 Automation Points each for Volume, Pan, Sends
Create 1 Automation Point for Visible Parameter
Create 2 Automation Points for Visible Parameter

– Mixer
Show/Hide MIDI Instruments ⇧5⃣
Show/Hide Input Channel Strips
Show/Hide Audio Channel Strips ⇧1⃣
Show/Hide Instrument Channel Strips ⇧2⃣
Show/Hide Auxiliary Channel Strips ⇧3⃣
Show/Hide Bus Channel Strips
Show/Hide Output Channel Strips ⇧4⃣
Cycle Through Mixer Modes (Single, Arrange, All) ⇧X
Deselect All ⌥⇧D
Select Audio Channel Strips ⇧A
Select Instrument Channel Strips ⇧S
Select Auxiliary Channel Strips ⇧F
Select Output Channel Strips ⇧O
Select MIDI Channel Strips ⇧E
Select Equal Colored Channel Strips ⇧C
Select Muted Channel Strips ⇧M
Select Previous (Left) Channel Strip ←
Select Next (Right) Channel Strip →
Create New Auxiliary Channel Strip ⌃N
Create New VCA Fader
Create Tracks for Selected Channel Strips ⌃T
Create Track Stack for Selected Channel Strips
Flatten Track Stack for Selected Channel Strips
Send All MIDI Mixer Data
Change Track in Record Mode
Change Track in Play Mode
Link Control Surfaces
Scroll to Audio
Scroll to Instruments
Scroll to Auxiliaries
Scroll to Buses
Scroll to Inputs
Scroll to Outputs
Scroll to Master/VCA
Scroll to MIDI Instruments
Show/Hide Signal Flow Channel Strips
Show/Hide Folder Tracks
Show/Hide Other Tracks
Show/Hide All Tracks with Same Channel Strip/Instrument
Show/Hide Instrument Name
Show/Hide Program
Show/Hide Bank
Show/Hide Assign 1
Show/Hide Assign 2
Show/Hide Assign 3
Show/Hide Assign 4
Show/Hide Assign 5
Show/Hide Audio Device Controls
Show/Hide Type and Number Label
Show/Hide Setting Menu
Show/Hide EQ Thumbnails
Show/Hide Gain Reduction Meter
Show/Hide MIDI Effects
Show/Hide Input / Instrument
Show/Hide Audio Effects
Show/Hide Sends
Show/Hide Output
Show/Hide Grouping
Show/Hide Automation
Show/Hide Track Icon
Show/Hide Pan Knob
Show/Hide VCA
Show/Hide Track Color
Show/Hide Track Stacks
Show/Hide Track Name
Show/Hide Track Number
Show/Hide Control Surface Bars
Configure Channel Strip Components…

– Score Editor
Linear Axis View
Wrapped View
Page View ⌃P
Toggle View
Show/Hide Instrument Names ⌃⇧N ⇧1⃣
Show/Hide Page Rulers ⌃⇧R ⇧2⃣
Toggle Duration Bar Display
Toggle Guide Line Display
Go to Page… ⌃/
•Paste Multiple at original Position
•Select Next Event →
•Select Previous Event ←
•Select Next Event of Same Type
•Select Previous Event of Same Type
Diatonic Insert
•Next Staff ↓
•Previous Staff ↑
Select All Regions and Events
Default Interpretation
Force Interpretation ⌃⇧I
Defeat Interpretation ⌃I
Stems: default
Stems: up ⌃⌥↑
Stems: down ⌃⌥↓
Beam Selected Notes ⌃B
Unbeam Selected Notes ⌃U
Default Beams ⌃D
Default Accidentals
Flats to Sharps
Sharps to Flats
Reset Note Attributes ⌃⇧⌫
Align Object Positions Vertically
Align Object Positions Horizontally
Align Object Positions
Assign MIDI Channels based on Score Split ⌃⇧C
•Nudge Position Up ⌃⌥⌘↑
•Nudge Position Down ⌃⌥⌘↓
•Nudge Position Left ⌃⌥⌘←
•Nudge Position Right ⌃⌥⌘→
Settings: Global Format ⌃⌥⇧F
Settings: Numbers and Names ⌃⌥⇧N
Settings: Guitar Tablature ⌃⌥⇧G
Settings: Chords and Grids ⌃⌥⇧C
Settings: Clefs and Signatures ⌃⌥⇧L
Settings: Extended Layout ⌃⌥⇧X
Settings: MIDI Meaning ⌃⌥⇧M
Settings: Score Colors ⌃⌥⇧O
•Part Box: 1/1 Note
•Part Box: 1/2 Note
•Part Box: 1/4 Note
•Part Box: 1/8 Note
•Part Box: 1/16 Note
•Part Box: 1/32 Note
•Next Part Box Symbol
•Previous Part Box Symbol
•Next Part Box Group
•Previous Part Box Group
•Attach Symbol: Fermata Up
•Attach Symbol: Fermata Down
•Attach Symbol: Staccato
•Attach Symbol: Staccatissimo
•Attach Symbol: Accent
•Attach Symbol: Strong Accent
•Attach Symbol: Long Accent
•Attach Symbol: Tenuto
•Attach Symbol: Up-Bow
•Attach Symbol: Down-Bow
•Attach Symbol: Flageolet
•Attach Symbol: Pizzicato
•Attach Symbol: Left Hand
•Attach Symbol: Right Hand
•Attach Symbol: Soft
•Attach Symbol: Heavy
•Attach Symbol: Jazz 1
•Attach Symbol: Jazz 2
•Attach Symbol: Jazz 3
•Attach Symbol: Jazz 4
•Attach Symbol: Jazz 5
•Attach Symbol: Jazz 6
Insert: Slur Up
Insert: Slur Down
Insert: Crescendo ⌃⇧,
Insert: Decrescendo ⌃⇧.
Clear main finger ⌃⌥⇧⌫
Set main finger 1 ⌃⌥⇧1
Set main finger 2 ⌃⌥⇧2
Set main finger 3 ⌃⌥⇧3
Set main finger 4 ⌃⌥⇧4
Set main finger 5 ⌃⌥⇧5
Clear pick finger
Set pick finger P
Set pick finger I
Set pick finger M
Set pick finger A
Set pick finger C

– Event Editor
Select Previous Event ↑
Select Next Event ↓
Length as Absolute Position ⌃⇧A
Articulation ID ⌃⇧D
Relative Position ⌃⇧R
•Numerical Edit of Event Position
•Duplicate Event and Numerical Edit ⌘D
•Copy Value to All Following Events ⇧V
Create Event

– Step Editor
Create Lane Set
Create Lane Set for GM Drums
Create Lane Set for Current Events
Clear Lane Set
Create Lane ⌥⌘N
Delete Lane ⌘⌫
Create Multiple Lanes…
Convert Lane…
Copy Lane ⌃C
Paste Lane ⌃V
Select All Lanes
Toggle Fix Value
Toggle Auto Define ⌃A
Select Next Lane ↓
Select Previous Lane ↑
Delete Lane Set

– Project Audio
Select Previous Audio File ↑
Select Next Audio File ↓
Show Audio File Details
Hide Audio File Details
Rename… ⇧↩
Add Audio File… ⌃F
Add Region ⌃R
Delete File(s) ⌘⌫
Optimize File(s)… ⌃O
Backup File(s) ⌃B
Copy/Convert File(s)… ⌃K
Move File(s) out of project
Select Used
Select Unused ⇧U
Show All Regions ⌥↓
Hide All Regions ⌥↑
Remove Silence from Audio Region… ⌃X
Import Region Information ⌃I
Export Region Information ⌃E
Create Group… ⌃G
Delete Selected Groups

– Audio File Editor
•Play/Stop All ⌃⌥⌘˽
•Play/Stop Region ⌃⌥⇧˽
•Play/Stop Region to Anchor
•Play/Stop Region from Anchor ⌃⌥˽
Create Backup ⌃B
Revert to Backup ⌃⌥⌘B
Save A Copy As…
Save Selection As… ⌥⌘S
Region -> Selection ⇞
Selection -> Region ⇟
Sample Loop -> Selection
Selection -> Sample Loop
Go to Selection Start ⌃↖
Go to Selection End ⌃↘
Go to Region Start ⌃⌥←
Go to Region End ⌃⌥→
Go to Region Anchor ⌃⌥↓
Go to Previous Transient ⌥←
Go to Next Transient ⌥→
Set Selection Start To Previous Transient ⇧←
Set Selection Start To Next Transients ⇧→
Set Selection End To Previous Transient ←
Set Selection End To Next Transient →
Selection Start and End to Previous Transient ⇧⌘←
Selection Start and End to Next Transient ⇧⌘→
Selection Start and End to Previous Transient and Play ⌥⌘←
Selection Start and End to Next Transient and Play ⌥⌘→
Set Region Anchor to Previous Transient
Set Region Anchor to Next Transient
Toggle Transient Editing Mode ⌃T
Increase Number of Transients ⌃=
Decrease Number of Transients ⌃-
Detect Transients of Audio File
Select All Previous ⌃⌥⇧←
Select All Following ⌃⌥⇧→
Create New Region ⌃R
Normalize ⌃N
Change Gain… ⌃G
Fade In ⌃I
Fade Out ⌃O
Silence ⌃⌫
Invert ⌃⇧I
Reverse ⌃⇧R
Trim ⌃⇧T
Remove DC Offset ⌃D
Time and Pitch Machine… ⌃P
Search Peak ⇧P
Search Silence ⇧S
Lock Position in Track when moving Anchor ⌃A

– EXS24 Instrument Editor
Invert Selection ⇧I
Load Audio Sample… ⌃F
New Zone ⌃Z
New Group ⌃G
Show/Hide Zones/Groups View
Show/Hide Velocity
View: View All
View: Restore To Defaults
Export Sampler Instrument and Sample Files ⌥⇧⌘S
•Backup Audio Files of All Used and Active Instruments of Current Project…
•Shift selected Zone(s)/Group(s) Left ⌥←
•Shift selected Zone(s)/Group(s) Right ⌥→
•Shift selected Zone(s)/Group(s) Left (Zones incl. Root Key) ⌥⇧←
•Shift selected Zone(s)/Group(s) Right (Zones incl. Root Key) ⌥⇧→
New Instrument
Open Instrument
Save Instrument ⌥⌘S
Save Instrument As…
Rename Instrument…
Load Multiple Samples… ⌃O
Open in Audio File Editor ⌃W
Select Zone of Last Played Key

– Step Input Keyboard
Note ‘C’ A
Note ‘C#’ W
Note ‘D’ S
Note ‘D#’ E
Note ‘E’ D
Note ‘F’ F
Note ‘F#’ T
Note ‘G’ G
Note ‘G#’ Y
Note ‘A’ H
Note ‘A#’ U
Note ‘B’ J
Rest ˽
Next note will be sharp ⇧3
Next note will be flat ⇧B
Chord Mode `
Delete ⌃⌫
Step Backwards ←
Step Forward →
Octave 0
Octave 1
Octave 2
Octave 3
Octave 4
Octave 5
Octave 6
Octave – 2 ⇧Z
Octave – 1 Z
Octave + 1 X
Octave + 2 ⇧X
1/1 Note 1
1/2 Note 2
1/4 Note 3
1/8 Note 4
1/16 Note 5
1/32 Note 6
1/64 Note 7
1/128 Note 8
Triplets on/off 9
Dotted note values on/off 0
Velocity 16 (ppp) C
Velocity 32 (pp) V
Velocity 48 (p) B
Velocity 64 (mp) N
Velocity 80 (mf) M
Velocity 96 (f) ,
Velocity 112 (ff) .
Velocity 127 (fff) /
Quantize note starts On/Off Q

– Smart Controls
Add Mapping

– Tools Menu
Scissors Tool I
Glue Tool G
Eraser Tool E
MIDI Thru Tool ⇧M
Text Tool ⇧T
Solo Tool S
Pencil Tool P
Crosshair Tool H
Mute Tool M
Finger Tool F
Layout Tool L
Zoom Tool Y
Resize Tool Z
Voice Separation Tool J
Camera Tool C
Velocity Tool V
Quantize Tool Q
Fade Tool A
Automation Select Tool U
Automation Curve Tool W
Marquee Tool R
Flex Tool X
Brush Tool B

– Control Surface Install Window
Scan for Selected Models
Add Selected Models

Leave a Reply

Your email address will not be published.

*